3M™ AC-131 Surface Pre-Treatment Conversion Coatings On Integral Products, Inc.

3M™ Surface Pre-Treatment AC-131 is a high-performance, non-chromated, conversion coating for applications on aluminum, nickel, and titanium alloys. The 3M™ AC-131 Pre-Treatment application is used for parts subsequently finished with epoxy-based and polyurethane-based organic coatings.

3M™ AC-131 Pre-Treatment provides an excellent solvent-free alternative to achieve the high performance required in aircraft paint applications. The current surface preparation technique such as Alodine® provides acceptable surfaces for coating applications. However, the alodine® process produces significant amounts of hazardous waste.

1 - 2 of 2 | Results Per Page | View | Unit of Measure

Request Information Compare Items

Authorized Distributor	Item Name	Description	Package Type	Include shipping calculator	Include in Freight Shipping Calculator	Type of Handling Units	Type of Packages	Brands	Induction Time	Pot Life after Mixing	Kit Designation	Storage	Note	Primer Type	Lap Shear Strength After 40 Days Aging at -55 Degree Fahrenheit (ºF) (-67 Degree Celsius (ºC)) Temperature	Color	Features	Hardness	Applications	Mix Ratio	Work Time	Appearance	Density	Processing	Note for Typical Properties	Tensile Strength	Test Method for Hardness	Viscosity at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Note for Mix Ratio	Test Method for Density	Packaging	Mix Ratio by Volume (Part A/Part B)	Mix Ratio by Weight (Part A/Part B)	Test Method for Tensile Strength	Original Equipment Manufacturer (OEM) Specifications	Consistency at 77 Degree Fahrenheit (ºF) Temperature	Gel Time at 77 Degree Fahrenheit (ºF) Temperature	Mix Ratio by Weight (R:H)	Suggested Cure Schedule Fahrenheit (ºF)	Maximum Service Temperature	Compressive Strength at 77 Fahrenheit (ºF)	Flame Retardant	Mix Ratio Ritt by Weight	Mixed Viscosity at 77 Fahrenheit (ºF) Temperature	Minimum Gel Time/Pot Life at 77 Fahrenheit (ºF) Temperature	Lap Shear Strength at 180 Fahrenheit (ºF) Temperature (Aluminum to Aluminum)	T-Peel Strength	Lap Shear Strength at 77 Fahrenheit (ºF) Temperature (Aluminum to Aluminum)	Test Method for Appearance	Test Method for Viscosity at 25 Degree Celsius (ºC) Temperature	Viscosity at 25 Degree Celsius (ºC) Temperature	Gel Time 125 Gram (g) at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Typical Cure Cycles	Note for Typical Physical Properties	Tensile Modulus	Test Method for Tensile Modulus	Elongation at Tensile Break	Test Method for Elongation at Tensile Break	Compressive Strength at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Compressive Strength at 250 Degree Fahrenheit (ºF) (121 Degree Celsius (ºC)) Temperature	Compressive Strength at 250 Degree Fahrenheit (ºF) (121 Degree Celsius (ºC)) after 7 days at 160 Degree Fahrenheit (ºF) (71 Degree Celsius (ºC)) and 85% Relative Humidity (RH)	Test Method for T-Peel Strength	Glass Transition Temperature, Tg, (E' Onset) Cured 5 days at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Glass Transition Temperature, Tg, (E' Onset) Cured 1 Hour at 150 Degree Fahrenheit (ºF) (66 Degree Celsius (ºC)) Temperature	Test Method for Tensile Lap Shear Strength	Tensile Lap Shear Strength for Etched and Primed Aluminum Tested at -94 Degree Fahrenheit (ºF) (-70 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength for Etched and Primed Aluminum Tested at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength for Etched and Primed Aluminum Tested at 250 Degree Fahrenheit (ºF) (121 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength for Etched and Primed Aluminum Tested at 350 Degree Fahrenheit (ºF) (177 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength for Etched and Primed Aluminum Tested at 400 Degree Fahrenheit (ºF) (204 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength for Carbon Fiber Reinforced Polymer (CFRP) Tested at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Tensile Shear Strength at 73 Degree Fahrenheit (ºF) (23 Degree Celsius (ºC)) Temperature for 4 Hour Cure Time (Aluminum to Aluminum)	Tensile Shear Strength at 73 Degree Fahrenheit (ºF) (23 Degree Celsius (ºC)) Temperature for 5 Hour Cure Time (Aluminum to Aluminum)	Tensile Shear Strength at 73 Degree Fahrenheit (ºF) (23 Degree Celsius (ºC)) Temperature for 6.5 Hour Cure Time (Aluminum to Aluminum)	Tensile Shear Strength at 73 Degree Fahrenheit (ºF) (23 Degree Celsius (ºC)) Temperature for 15 Hour Cure Time (Aluminum to Aluminum)	Tensile Shear Strength at 73 Degree Fahrenheit (ºF) (23 Degree Celsius (ºC)) Temperature for 24 Hour Cure Time (Aluminum to Aluminum)	Tensile Shear Strength at 73 Degree Fahrenheit (ºF) (23 Degree Celsius (ºC)) Temperature for 120 Hour Cure Time (Aluminum to Aluminum)	Tensile Shear Strength at 73 Degree Fahrenheit (ºF) (23 Degree Celsius (ºC)) Temperature for 168 Hour Cure Time (Aluminum to Aluminum)	Note for Cure Time	Precautionary Statement	Tensile Lap Shear Strength After 7 Days for Etched and Primed Aluminum Tested at 160 Degree Fahrenheit (ºF) (71 Degree Celsius (ºC)) Temperature and 85 % Relative Humidity (RH)	Tensile Lap Shear Strength for Anodized and Primed Aluminum (Fluid Resistance) Cure for 7 Days Tested at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength After 7 Days for in Water Anodized and Primed Aluminum (Fluid Resistance) Tested at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength After 7 Days in IPA for Anodized and Primed Aluminum (Fluid Resistance) Tested at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength After 7 Days n Hydraulic Fluid for Anodized and Primed Aluminum (Fluid Resistance) Tested at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Tensile Lap Shear Strength After 7 Days in Jet A for Anodized and Primed Aluminum (Fluid Resistance) Tested at 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature	Appearance - Test Method Visual	Wet Density - Test Method ASTM D1875	Viscosity at 77°F (25°C) - Test Method ASTM D2196	Extrusion rate at 77°F (25°C) after 8 hours - Test Method OEM	Sag resistance - Test Method OEM	Cure cycle	Cured Density - Test Method ASTM D1622	Compressive strength at 73°F (23°C) - Test Method ASTM D695	Compressive strength at 300°F (149°C) - Test Method ASTM D695	Compressive strength at 350°F (177°C) - Test Method ASTM D695	Compressive strength at 73°F (23°C) after hot/wet exposure - Test Method ASTM D695	Compressive strength at 265°F (129°C) after hot/wet exposure - Test Method ASTM D695	Tensile lap shear strength, Al/Al, at 73°F (23°C) - Test Method ASTM D1002	Self-extinguishing time - 15-second horizontal burn - Test Method FAR 25.853	Self-extinguishing time - 12-second vertical burn - Test Method FAR 25.853	Tg, TMA, cured 1hour at 350°F (177°C) - Test Method ASTM E1824	Tg, DMA, cured 1hour at 350°F (177°C) - Test Method ASTM D4065	CTE, below Tg, cured 1hour at 350°F (177°C) - Test Method ASTM E831	Hot/wet exposure note	First Aid	Appearance - 1619-1 A Resin - Test Method Visual	Appearance - 1619-1 B Hardener - Test Method Visual	Appearance - Mixed System - Test Method Visual	Density - 1619-1 A Resin - Test Method ASTM D1622	Density - 1619-1 B Hardener - Test Method ASTM D1622	Density - Mixed System - Test Method ASTM D1622	Viscosity - 1619-1 A Resin - Test Method ASTM D2196	Viscosity - 1619-1 B Hardener - Test Method ASTM D2196	Viscosity - Mixed System - Test Method ASTM D2196	Extrudability - 1619-1 A Resin - Test Method BMS5-28	Extrudability - 1619-1 B Hardener - Test Method BMS5-28	Extrudability - Mixed System - Test Method BMS5-28	Mix Ratio - EPOCAST® 1619-1 A Resin - Parts by weight	Mix Ratio - EPOCAST® 1619-1 B Hardener - Parts by weight	Mixing	Gel time, 62.5 g at 77°F (25°C)	Lap shear strength at 73°F (23°C), Al-Al - Test Method ASTM D1002	Compressive strength at 180°F (82°C) - Test Method ASTM D695	Compressive modulus at 73°F (23°C) - Test Method ASTM D695	Flammability, 12-second vertical burn - Result - Test Method BMS5-28	Flammability - Extinguishing time - Test Method BMS5-28	Flammability - Burn length - Test Method BMS5-28	Flammability - Drip extinguishing time - Test Method BMS5-28	Weight gain - Mil-S-3136, Type III test fluid - Test Method ASTM D543	Weight gain - Mil-H-5606 hydraulic fluid - Test Method ASTM D543	Weight gain - Skydrol 500A - Test Method ASTM D543	Weight gain - Distilled water - Test Method ASTM D543	Hardness, Shore D - Test Method ASTM D2240	Insert pull out strength - Test Method BMS5-28	Insert torque out strength - Test Method BMS5-28	Density at 25°C - Test Method ASTM D1622	Flow - Test Method BMS 5-28, RMS 027, SMS 116201	Extrudability at 25°C - Test Method BMS 5-28, RMS 027, SMS 116201	Work life after thaw, 100 g at 25°C	Cure note	Ultimate compressive strength at 25°C - Test Method ASTM D695	Ultimate compressive strength at 177°C - Test Method ASTM D695	Ultimate tensile strength - Test Method ASTM D638	Young’s modulus - Test Method ASTM D638	Shear modulus - Test Method ASTM D5279	Flexural modulus - Test Method ASTM D790	Lap shear strength, Al-Al - Test Method ASTM D1002	Tg, onset by TMA (expansion probe) - Test Method ASTM E1363	Coefficient of Thermal Expansion - Above Tg - Test Method ASTM E831	Coefficient of Thermal Expansion - Below Tg - Test Method ASTM E831	Fluid weight gain - DI water - Test Method ASTM D543	Fluid weight gain - Skydrol 500B - Test Method ASTM D543	Fluid weight gain - MIL-H-5606 hydraulic - Test Method ASTM D543	Fluid weight gain - ASTM D471 ref. fuel - Test Method ASTM D543	Flammability, horizontal or vertical - Test Method BSS 7230	Appearance - 1648 A - Test Method Visual	Appearance - 1648 B - Test Method Visual	Appearance - 1648 A/B - Test Method Visual	Density - 1648 A - Test Method ASTM D1875	Density - 1648 B - Test Method ASTM D1875	Density - 1648 A/B - Test Method ASTM D1875	Viscosity - 1648 A - Test Method ASTM D2196	Viscosity - 1648 B - Test Method ASTM D2196	Viscosity - 1648 A/B - Test Method ASTM D2196	Gel time - 1648 A - Test Method ASTM D2471	Gel time - 1648 B - Test Method ASTM D2471	Gel time - 1648 A/B - Test Method ASTM D2471	Extrusion rate at 10 min - 1648 A - Test Method OEM	Extrusion rate at 10 min - 1648 B - Test Method OEM	Extrusion rate at 10 min - 1648 A/B - Test Method OEM	Slump - 1648 A - Test Method ASTM D2202	Slump - 1648 B - Test Method ASTM D2202	Slump - 1648 A/B - Test Method ASTM D2202	Mix Ratio - Epocast® 1648 A - Parts by weight	Mix Ratio - Epocast® 1648 B - Parts by weight	Gel time, 60g at 77°F (25ºC)	Compressive strength after hot/wet exposure at 73°F (23°C) - Test Method ASTM D695	Compressive modulus after hot/wet exposure at 73°F (23°C) - Test Method ASTM D695	Tensile lap shear strength at 73°F (23°C), Al-Al - Test Method ASTM D1002	Tensile lap shear strength after hot/wet exposure at 73°F (23°C), Al-Al - Test Method ASTM D1002	Insert pull-out strength - Test Method OEM	Insert torque strength - Test Method OEM	Self-extinguishing time (12s vertical) - Test Method FAR 25.853	Smoke density at 4 minutes - Test Method FAR 25 Appendix F V(b)	Decomposition byproducts - HCN - Test Method ABD0031 / AITM 3-0005	Decomposition byproducts - CO - Test Method ABD0031 / AITM 3-0005	Decomposition byproducts - NOx - Test Method ABD0031 / AITM 3-0005	Decomposition byproducts - SO2 - Test Method ABD0031 / AITM 3-0005	Decomposition byproducts - HF - Test Method ABD0031 / AITM 3-0005	Decomposition byproducts - HCl - Test Method ABD0031 / AITM 3-0005	Hot / Wet exposure note	Effect of Mix Ratio on Flammability - Extinguish Time - 15 wt% less 1648B	Effect of Mix Ratio on Flammability - Extinguish Time - Recommended 100:20 ratio	Effect of Mix Ratio on Flammability - Extinguish Time - 15 wt% more 1648B	Effect of Mix Ratio on Flammability - Burn Length - 15 wt% less 1648B	Effect of Mix Ratio on Flammability - Burn Length - Recommended 100:20 ratio	Effect of Mix Ratio on Flammability - Burn Length - 15 wt% more 1648B	Effect of Mix Ratio on Flammability - Drip Extinguishing Time - 15 wt% less 1648B	Effect of Mix Ratio on Flammability - Drip Extinguishing Time - Recommended 100:20 ratio	Effect of Mix Ratio on Flammability - Drip Extinguishing Time - 15 wt% more 1648B	Appearance - EPIBOND® 115 A Resin	Appearance - EPIBOND® 115 B Hardener	Appearance - Mixed Adhesive	Appearance - Test Method	Density - EPIBOND® 115 A Resin	Density - EPIBOND® 115 B Hardener	Density - Mixed Adhesive	Density - Test Method	Viscosity at 77°F (25°C) - EPIBOND® 115 A Resin	Viscosity at 77°F (25°C) - EPIBOND® 115 B Hardener	Viscosity at 77°F (25°C) - Mixed Adhesive	Viscosity - Test Method	Pretreatment	Working time	Mix Ratio - EPIBOND® 115 A Resin - Parts by weight	Mix Ratio - EPIBOND® 115 A Resin - Parts by volume	Mix Ratio - EPIBOND® 115 B Hardener - Parts by weight	Mix Ratio - EPIBOND® 115 B Hardener - Parts by volume	Gel time, 100 g, @ 77°F, >	Typical Cure Cycle	Tensile lap shear strength at 77°F (25°C)	Tensile lap shear strength at 200°F (93°C)	Tensile lap shear strength at 350°F (177°C)	Tensile lap shear strength at -85°F (-65°C)	Tensile lap shear strength - Test Method	T-Peel strength	T-Peel strength - Test Method	Tg by DMA Dry Tg as cured	Wet Tg after 42-day at 145°F at 85% RH	Tg - Test Method	Tensile Strength at 77°F (25°C)	Tensile Strength - Test Method	Flexural Strength at 77°F (25°C)	Flexural Strength - Test Method	Compressive Strength at 77°F (25°C)	Compressive Strength - Test Method	Handling strength - 16 hours at RT	Handling strength - 1 hour at 155°F	Handling strength - 1 hour at 155°F + 5 hours at 200°F	Bondline Thickness Control - 0.010 inches	Bondline Thickness Control - 0.020 inches	Bondline Thickness Control - 0.040 inches	Bondline Thickness Control - 0.080 inches	Appearance - 1210 A-1 Resin - Test Method Visual	Appearance - 1210 B Hardener - Test Method Visual	Density - 1210 A-1 Resin - Test Method ASTM D792	Density - 1210 B Hardener - Test Method ASTM D792	Density - Mixed System - Test Method ASTM D792	Viscosity - 1210 A-1 Resin - Test Method ASTM D2393	Viscosity - 1210 B Hardener - Test Method ASTM D2393	Viscosity - Mixed System - Test Method ASTM D2393	Flash point, COC - 1210 A-1 Resin - Test Method ASTM D92	Flash point, COC - 1210 B Hardener - Test Method ASTM D92	Flash point, COC - Mixed System - Test Method ASTM D92	Solids - Mixed System - Test Method ASTM D1644	Mix Ratio - EPIBOND® 1210 A-1 Resin - Parts by weight	Mix Ratio - EPIBOND® 1210 B Hardener - Parts by weight	Work life, 100 g at 25°C	Maximum service temperature - Test Method ASTM D648	Tensile lap shear - Al-Al at 25°C - Test Method ASTM D1002	Tensile lap shear - steel to steel at 25°C - Test Method ASTM D1002	Tensile lap shear - steel to steel at 66°C - Test Method ASTM D1002	Tensile lap shear - polyester to polyester at 25°C - Test Method ASTM D1002	Fluid Immersion - JP-4 - Test Method ASTM D1002	Fluid Immersion - Skydrol - Test Method ASTM D1002	Fluid Immersion - Distilled water - Test Method ASTM D1002	CTE - a1	CTE - a2	Thermal Conductivity	Outgassing - TML - Test Method ASTM E595	Outgassing - CVCM - Test Method ASTM E595	Appearance - 9615 A Hardener - Test Method Visual	Density - 9615 A Hardener - Test Method ASTM D792	Viscosity - 9615 A Hardener - Test Method ASTM D2393	Flash point, COC - 9615 A Hardener - Test Method ASTM D92	Mix Ratio - Hardener 9615 A - Parts by weight	Work life, 100g at 25°C	Tensile lap shear - Al-Al at 25°C (cured 25°C / 2 days) - Test Method ASTM D1002	Tensile lap shear - Al-Al at 25°C (cured 25°C / 2h + 121°C / 30min) - Test Method ASTM D1002	Tensile lap shear - Al-Al at 150°C (302°F) - Test Method ASTM D1002	CTE - Above transition - Test Method Huntsman	CTE - Below transition - Test Method Huntsman	Thermal Conductivity - Test Method C-Therm TCi	Heat Capacity - Test Method C-Therm TCi	Appearance - Hardener 9861 - Test Method Visual	Density - Hardener 9861 - Test Method ASTM D792	Viscosity - 1210 A-1 Resin - Test Method ASTM D2196	Viscosity - Hardener 9861 - Test Method ASTM D2196	Mix Ratio - Hardener 9861 - Parts by weight	Gel Time, 100g at 77°F (25°C)	Lap shear strength, Al-Al - 77°F (25°C) - Test Method ASTM D1002	Lap shear strength, Al-Al - 200°F (93°C) - Test Method ASTM D1002	Lap shear strength, Al-Al - 300°F (149°C) - Test Method ASTM D1002	Tg (DMA) - E’ Onset - Test Method Huntsman	Tg (DMA) - Tand peak - Test Method Huntsman	CTE - a1 Below transition - Test Method Huntsman	CTE - a2 Above transition - Test Method Huntsman	Tensile Strength - Test Method ASTM D638	Tensile Modulus - Test Method ASTM D638	Tensile Elongation - Test Method ASTM D638	Flexural Strength - Test Method ASTM D790	Lap Shear after fluid immersion - JP-4 - Test Method ASTM D1002	Lap Shear after fluid immersion - Skydrol - Test Method ASTM D1002	Lap Shear after fluid immersion - Distilled water - Test Method ASTM D1002	Mix ratio - Per Weight	Mix ratio - Per Volume	Mixing color indicator - Resin (A)	Mixing color indicator - Hardener (B)	Mixing color indicator - Mixed	Recommended Cure Schedules	Working time at 77°F (25°C)	Gel time at 77°F (25°C)	*Tensile lap shear strength - Aluminum 2024, Cured 150°F (66°C) for 2 hours; Test Temp 77°F (25°C) - Test Method ASTM D1002**	Thick Adherend Lap Shear Strength - Cured 7 days at 77°F (25°C); Test Temp 77°F (25°C) - Test Method ASTM 5656	T-Peel Strength - Cured 200°F (93°C) / 2 hours; Test Temp 77°F (25°C) - Test Method ASTM D3167	Compressive Strength, ultimate - Cured 200°F (93°C) / 2 hours; Test Temp 77°F (25°C) - Test Method ASTM D695	Compressive Modulus - Cured 200°F (93°C) / 2 hours; Test Temp 77°F (25°C) - Test Method ASTM D695	Hardness - Cured 7 days at 77°F (25°C); Test Temp 77°F (25°C) - Test Method ASTM D2240	Resistivity - 10 Volts; Test Temp 77°F (25°C)	Glass transition temperature, Tg - Cured 1 hour at 300°F (121°C); DMA E’ onset	Outgassing - TML - Cured 7 days at 77°F (25°C) - Test Method ASTM E595	Outgassing - CVCM - Cured 7 days at 77°F (25°C) - Test Method ASTM E595

AC-131 BB	N/A 3M™ AC-131 2-Part Blue Color Surface Pre-Treatment Conversion Coating	N/A 3M™ Surface Pre-Treatment AC-131 is a high-performance, non-chromated, conversion coating for applications on aluminum, nickel, and titanium alloys. The 3M™ AC-131 Pre-Treatment application is used for parts subsequently finished with epoxy-based and polyurethane-based organic coatings. 3M™ AC-131 Pre-Treatment provides an excellent solvent-free alternative to achieve the high performance required in aircraft paint applications. The current surface preparation technique such as Alodine® provides acceptable surfaces for coating applications. However, the alodine® process produces significant amounts of hazardous waste.	N/A Each	N/A	N/A	N/A	N/A	N/A 3M™	N/A 30 minutes	N/A 24 hour	N/A 100 mL50 mLPint Quart 1 gal5 gal	N/A For BMS10-128 and AMS3175, the shelf life of 3M™ Surface Pre-Treatment AC-131 BB and CB is 12 months from the date of package when stored in the original unopened containers between 40 ºF and 100 ºF.	N/A These products were manufactured under a 3M™ Quality Management System registered to the AS9100 standard.	N/A	N/A	N/A Blue	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A
AC-131 CB	N/A 3M™ AC-131 2-Part Clear Color Surface Pre-Treatment Conversion Coating	N/A 3M™ Surface Pre-Treatment AC-131 is a high-performance, non-chromated, conversion coating for applications on aluminum, nickel, and titanium alloys. The 3M™ AC-131 Pre-Treatment application is used for parts subsequently finished with epoxy-based and polyurethane-based organic coatings. 3M™ AC-131 Pre-Treatment provides an excellent solvent-free alternative to achieve the high performance required in aircraft paint applications. The current surface preparation technique such as Alodine® provides acceptable surfaces for coating applications. However, the alodine® process produces significant amounts of hazardous waste.	N/A Each	N/A	N/A	N/A	N/A	N/A 3M™	N/A 30 minutes	N/A 24 hour	N/A 100 mL50 mLPint Quart 1 gal5 gal	N/A For BMS10-128 and AMS3175, the shelf life of 3M™ Surface Pre-Treatment AC-131 BB and CB is 12 months from the date of package when stored in the original unopened containers between 40 ºF and 100 ºF.	N/A These products were manufactured under a 3M™ Quality Management System registered to the AS9100 standard.	N/A	N/A	N/A Clear	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A

1 - 2 of 2 | Results Per Page | View | Unit of Measure