Solids By Weight |
N/A 12 % |
Appearance |
N/A Liquid |
Density |
N/A 7 lb/gal |
Viscosity at 70 Degree Fahrenheit (ºF) Temperature |
N/A 10 cP |
Applications |
N/A DAPCO™ 1-100 Primer is used to improve the bond strength between most silicone RTVs and different substrates. When properly applied and cured, the bond strength often exceeds the cohesive strength of the RTV. |
Processing |
N/A
DAPCO™ 1-100 Primer is supplied ready to use, no mixing required. DAPCO™ 1-100 Primer hydrolyzes (cures) when exposed to the moisture in the air, therefore, it is recommended that the necessary amount of DAPCO™ 1-100 Primer is poured into an aluminum or glass dish and the bottle resealed. Apply DAPCO™ 1-100 Primer in a thin, uniform coating by using cheesecloth (preferred) or brush. |
Curing |
N/A
Allow to dry for one hour or until a dull pink color is visible. Cure RTV per instruction on individual product bulletin. |
Surface Preparation |
N/A The surface must be free from contaminants, i.e., dirt, oil, grease, etc. Clean the surface by wiping with suitable solvent. |
Storage and Handling |
N/A DAPCO™ 1-100 primer contains a flammable solvent. Keep away from open flame and excessive heat. Use with adequate ventilation. Shelf life is 6 months from date of shipment. |
Safety |
N/A Exercise good housekeeping practices. Material Safety Data Sheets available upon request. |
Note |
N/A The information in this bulletin is believed to be reliable however, when evaluating this product, the user should consider factors such as processing and environmental conditions which may influence performance. Inasmuch as the seller is unable to control the final use of this product, our liability is limited to replacing the product or refunding the purchase price of material which is proven not to comply substantially with the data presented in this bulletin. Seller is not responsible for any commercial loss or damage arising from the use of this product. The user is responsible for determining the product's acceptability for a specific purpose and to establish safety precautions as may be required. No statements or recommendations contained in this bulletin are to be construed as inducements to infringe any relevant patent. |