Mix Ratio by Volume |
N/A 2 parts base to 1 part catalyst |
Reducer by Volume |
N/A Up to 4.5 parts of Distilled or Deionized Water |
Induction Time |
N/A No Induction Necessary |
Recommended Dry Film Thickness |
N/A 0.8 to 1.3 mil |
Initial Mixed Viscosity at 77 Degree Fahrenheit (ºF) Temperature (# 2 Zahn Cup) |
N/A 20 ± 2 seconds |
Mixed Theoretical Weight Per Gallon |
N/A 11.4 lb/gal |
Tolerance for Mixed Theoretical Weight (±) |
N/A 0.5 |
Mixed Theoretical Percentage (%) Solids by Weight |
N/A 75.3 % |
Mixed Theoretical Percentage (%) Solids by Volume |
N/A 61.4 % |
Theoretical Coverage at 1 Mil Dry Film Thickness |
N/A 985 ft² |
Pot Life at 77 Degree Celsius (ºC) ± 5 Degree Fahrenheit (ºF) Temperature |
N/A 3 hour |
Maximum Coatings Volatile Organic Compounds (VOC) Volume |
N/A 340 g/L2.8 lb/gal |
Note for Typical Characteristics |
N/A Characteristics are calculated based on product formula and raw material characteristics reported by suppliers. Values are thought to be representative, but they are not to be treated as specifications. |
Shelf Life |
N/A 1 year from DOM when stored between 35 ºC to 115 ºF in original, unopened containers away from direct sunlight. |
Dry Times1 | N/A Dry to Stack: Allow panels to air dry under standard conditions for 90 minutes before stacking. |
Application Recommendations2 | N/A May be applied by Conventional, Airless, Air Assisted Airless, HVLP or Electrostatic spray equipment. |
Clean Up |
N/A While still liquid, flush with water. Use IS-248 Cleaning Solvent for Water Reducible Primers to remove residual primer from parts and equipment. |
Health, Safety, Storage and Handling |
N/A Refer to the MSDS for each component. |
Color |
N/A DN 9295 Green |